Product category : Other grease series
Borate is a new high temperature anti-wear extreme pressure additive, which has been widely used abroad. On the basis of comprehensive research at home and abroad, our company has researched and developed a new generation of Borate additives suitable for
Helpline : 0571-63478168| project | Typical Data |
| appearance | Oil like viscous suspension |
| content | Not less than 50% |
| particle | ＜5μm |
1. Long service life, because it is an extreme pressure film formed by FexBy formed by boronizing, this surface facial mask has high hardness, good abrasion resistance, good high-temperature oxidation resistance, corrosion resistance, and low consumption in use, so it has a long service life.
2. The anti wear and extreme pressure effect is good. It is made from low viscosity oil with boron containing additives. Generally, when the dosage is 2-6%, the PB value of the product can reach over 1000N.
3. It is insensitive to the selectivity of metal materials, that is to say, Borate additives are suitable for all kinds of metal materials, and will not cause metal corrosion, non-toxic, odorless.
4. Good high-temperature resistance, with good wear and extreme pressure resistance even at temperatures above 250 ℃.
5. Suitable for lithium based grease, composite lithium based grease, composite aluminum based grease, urea based grease, etc., without damaging other physical and chemical properties of the lubricating grease, especially without affecting the water resistance of the original grease body.
6. It has good compatibility with other active additives containing phosphorus, sulfur, and chlorine, and the effect is better when combined with these additives.
